Oak decking 145 x 22mm Smooth, European, Hardwood, Character, Rustic, Air Dried, S4S E4S

145mm x 22mm - Smooth Oak Decking

  • £40.95 per m2
  • Product Code
  • 1413b
  • Profile
  • Smooth/Smooth
  • Board Width
  • 145mm
  • Thickness
  • 22mm
  • Finish
  • Unfinished
  • Material
  • Oak
All prices exclude delivery
Product Summary
  • 145 x 22mm oak decking boards
  • Smooth both sides
  • Eased edges
  • Dense & durable slow grown hardwood
  • Unfinished
  • Character/Rustic Grade - although some Prime grade may be included
  • Machined to order 'In-House' at Round Wood
Oak Decking
Our oak boards can vary in colour from a very light brown through to a medium honey, giving a light, natural appearing deck that will blend sympathetically with most surroundings. All exterior Oak will develop surface splits, shakes and cracks over time - this is a natural occurrence and these can even close back up again with the changing seasons. Our Oak is a mixture of Rustic to Prime grade, allowing for cat paw, small, medium and large knots. Some boards may contain Sap and surface splits however this is structurally sound and within grade.
Board Lengths
Whilst stocks can vary, our 145 x 22mm oak decking is generally available in lengths of 3m, 3.5m and 4m Please contact us with any specific requirements you may have.
Finish
The boards are planed smooth with eased edges on both sides. Unfinished and ready for decking oil if desired. Any boards that are cut, should have a bees wax or oil applied to the ends.
Hardwood Decking Wrench
We recommend installing your decking boards with the hardwood decking wrench. This is a self-locking deck board straightening tool that can be used to hold bent boards straight whilst fasteners are installed. See associated products below. We also offer a hire service.
Oak Balustrade Components
In order for you to finish your oak deck to the highest possible standard, we offer a unique range of decking components, including Oak handrail, baserail, infill, posts and spindles. For more information, visit our Decking Components section. (Please note our Oak Balustrade is machined to order and will not be supplied pre-finished)
Fitting Methods
Simply screw through the face of the board into your sub-frame. Always Pilot Drill before fitting screws and drill 2mm oversize holes to allow for some expansion. We recommend 400mm centre to centre joist spacing. Each hole can be plugged. We do not recommend that Hidden Fastening systems are used with oak decking.
Associated Products Oak Plugs x 100
£12.50 each
Deck Screws - Stainless Steel
£20.00 per box
145 x 21mm Smooth Balau Decking
£36.50 per m2
Hardwood Wrench
£195.00 per EACH
118 x 21mm Thermory® Thermo-Treated Ash Decking
From £55.69 per m2

  • Copyright © 2009 - 2017 Round Wood Of Mayfield
  • Follow us on Instagram