Aluminium Riple Round Water Table – RAL 6018 – Yellow Green
- Available in various sizes
- Thickness 3mm Aluminium
- As standard, our Aluminium water tables can be made in any of our 8 RAL colours at no extra cost! All other RAL colours are available for an additional charge.
- PUMP/LED spout included in price
- Requires a flat and level surface with no protruding points
- Requires either a weatherproof dual socket with a safety cut-off or to be hard-wired into an RCD-type box - GUIDANCE ONLY - PLEASE CONSULT A QUALIFIED ELECTRICIAN FOR CORRECT AND LEGAL INSTALLATION
- LED driver Unit: Input 230V/50Hz 2W (12V DC output)
- Single Spout WT Pump: 230V/50Hz 45W
- Multi Spout WT Pump: 230V/50Hz 400W
- All water features are supplied without plugs for the pump or the LED spout
A water table that requires little maintenance and boast an advanced closed water circuit that helps to prevent blockages. The water is gently raised around 50mm above the surface before cascading over in a rill that surrounds the table.
Our Somni and Riple water tables are a striking and modern feature perfect where space might be a consideration. Made from 3mm thick Aluminium our water tables require little maintenance and boast an advanced self-contained water circuit that helps to prevent blockages and does not require a water feed. The water is gently raised up through the OASE LED Spout approximately 50mm (this is adjustable) above the surface before cascading over into a rill that surrounds the table back into the reservoir body. The LED light illuminates the water spout adding another dimension after dark. As standard we can produce the Somni in the following RAL colours; 9016 PURE WHITE 7016 ANTHRACITE GREY 9005 JET BLACK 5001 GREEN BLUE 1005 HONEY YELLOW 6018 YELLOW GREEN 3020 TRAFFIC RED 2004 PURE ORANGE For any other RAL colour prices are available on application. REQUIREMENTS: A flat and level surface with no protruding points (like hardcore may have), sand or gravel is ideal and assists in levelling. The power cables, 1x for the pump and one for the LED driver unit, exit the water table via the overflow pipe (underneath the water table) and are approximately 8m. You will need either a weatherproof dual socket with a safety cut-off or, the plugs can be cut-off and the power cables hard-wired into an RCD-type box - THIS IS ONLY FOR ADVSIORY PURPOSES, PLEASE CONSULT A QUALIFIED ELECTRICIAN FOR CORRECT AND LEGAL INSTALLATION Power Requirements: LED driver Unit: Input 230V/50Hz 2W (12V DC output) - Single Spout WT Pump: 230V/50Hz 45W - Multi Spout WT Pump: 230V/50Hz 400W. Please note: this product is not silent, it will produce sound from the both the cascading, bubbling water and the running pump can be heard in certain circumstances.
GET IN TOUCH
Looking for advice or would like a quote?
Fill out our quick form below and we’ll get back to you by the end of the next working day.