Solid Oak flooring – Prime grade, Smooth, Untreated – 205 x 21 mm
- Prime grade Oak Floor Board
- Smooth surface finish
- Bespoke widths up to 205mm wide x 21mm thick
- Tongues and Grooves on the long sides
- Rustic Grade, Character Grade or Prime Grade available
- Square edges available on request
- Filling & sanding may be required
- Install method: Glue, Nail
“Traditionally crafted *in-house , this solid oak flooring boards are supplied unfinished, allowing you to apply oil, lacquer, waxes
and stains to your precise requirements”
Out of stock
Include 10% wastage
Tongue & groove boards. Some filling and sanding will be required. Solid floor needs to be acclimatized in the room that it will be laid,for a min 2 weeks. 10-15mm expansion gap is recommended. Sufficient drying time is needed for screed install. Damp proofer may be required.
Oak is a dense & durable slow grown hardwood.
Our oak boards can vary in colour from a very light brown through to a medium honey, giving a light, natural appearing deck that will blend sympathetically with most surroundings.
All exterior Oak will develop surface splits, shakes and cracks over time – this is a natural occurrence and these can even close back up again with the changing seasons.
Our Oak is a mixture of Rustic to Prime grade, allowing for cat paw, small, medium and large knots.
Some boards may contain sap and surface splits however this is structurally sound and within grade.
Board Lengths: whilst stock levels vary, our oak boards are generally available in lengths of 3m and 3.5m. Please contact us with any specific requirements you may have.
Our oak boards are planed smooth with eased long edges on both sides.
Comes unfinished and ready for oil if desired.
Any boards that are cut, should have a bees wax or end grain sealer applied to the freshly trimmed ends.
To ensure a firm hold, stainless steel decking screws should be used to install oak decking.