Sale!

Yellow Balau Batten – PAR

Product Code:C-000341
  • Yellow Balau Trellis/ Batten board
  • PAR Profile
  • Extremely dense & durable hardwood
  • Naturally resistant to insect and fungal attack
  • Square Edges
  • m2 rate calculated, based on 10mm spaces between boards

Light through to dark brown decking boards which, when the different shades are fitted together, produces an impressive and contemporary look that is particularly striking when wet.

Options Available:

Please Select:

Enter your Area:

Include 10% wastage

Quantity of boards required:
Packs required
67.92
All prices include VAT but exclude delivery
In Stock
Delivery times & cost calculated at checkout
Collection available for this product
Call 01435 867 072
Get a Quote Call 01435 867 072
Price From £9.86

Our Balau boards range in colour from light through to dark brown. When the different shades are fitted together, an impressive and contemporary look, that is particularly striking in the wet, is achieved. Grading guidelines allow for Balau to contain microscopic holes known as pinworm – these are in no way detrimental to the structure of the timber.

Balau is an extremely dense and durable hardwood. Naturally resistant to insect and fungal attack.

Our Balau boards tend to range from light through to dark brown. When the different shades are fitted together, an impressive and contemporary look that is particularly striking in the wet is achieved.

Grading guidelines allow for Balau to contain microscopic holes known as pinworm – these are in no way detrimental to the structure of the timber.

Whilst Balau is an extremely stable hardwood, we recommend that you leave a minimum 4mm gap between each board (5-6mm for 145mm wide boards). Being a natural product there will be some expansion and shrinkage in certain climates, but this is not likely to be noticed by the human eye.

Please note that as hardwood specialists, we do not stock softwood for sub-frames. We recommend that you source this from a standard timber merchant.

Balau can be fitted using stainless steel deck screws (always pre-drill hardwoods) and using hidden fixing systems *boards edge grooved to accept hidden fixings*

We recommend sealing the cut ends of your boards with an end grain sealer (beeswax works beautifully).

Decking oil: The most common finish for any hardwood deck. This product contains UV filters to delay the silvering process that strong sunlight causes in any hardwood.

 

GET A QUOTE

Looking for advice or would like a quote?
Fill out our quick form below and we'll get back to you by the end of the next working day.