Corten Steel Flama Fire Table

The Flama fire table is a real statement piece, perfect for evening entertaining or keeping the chill away in the cooler months. Made from 3mm thick corten steel with feet to raise the fire table off of the ground it is made to last. Boasting a generous fire box and the wide metal surround ‘table’ part, these fire tables are sure to keep you warm for hours! Please note the whole of the metal fire table will become very hot when in use, the ‘table’ surrounds should not have anything placed on them that is not designed for high heat tolerances
Built in Corten Steel this low maintenance Fire Pit will hold its own in both modern and traditional gardens. The steel will, over the course of 9 months, change from a blue steel into the rustic deep orange. This is a natural effect which will happen as the Fire Pit reacts to its environment.

Corten Steel

Corten Steel, also known as weathering steel, is a special steel originally developed for bridge building and skyscraper construction due to its incredible strength. It starts out as a blue steel but on exposure to the elements, develops a protective, striking rust appearance, creating warm rich textures not always associated with metal. Due to the chemical composition of Corten Steel, a very dense oxidisation layer is formed during the weathering process which protects the blue steel inside. This natural fixed coating of rust provides protection against further corrosion. If this protective barrier is compromised, it will simply form a new skin to protect itself. Corten Steel is extremely durable and has a far higher resistance to atmospheric corrosion than other steels.

Run Off
During the weathering process the Corten Steel produces carbon run off or staining to adjacent materials such as stone or concrete. To reduce this possible staining, we recommend raising the product up off the ground by using a suitable stand, blocks of wood, slabs and such like; this will prevent any direct contact with the flooring material. After the initial reactive period Corten Steel will cure and self-seal with little to no carbon run off. The weathering process of Corten Steel is integral to this product and as such we will not accept any responsibility for damage caused to surrounding materials as a result of carbon run off from Corten Steel products. Please ensure you do not place your product on any surface that may be damaged during the weathering process.

Step-by-Step Weathering Guide

• Stage 1 – Freshly manufactured Corten Steel. At this stage the dark oily residue coats the Corten Steel.
• Stage 2 – The oily residue is beginning to break down, as the Corten Steel begins to weather.
• Stage 3 & 4 – The “Run-Off” stage – This can take around 3-9 months depending on weather and positioning.
• Stage 5 & 6 – The final stages of the weathering process. Some “Run-Off” may still occur as the Corten Steels patina develops to a striking, more consistent appearance.

Corten can be easily cleaned using water and a soft brush. it can be sealed using a metal specific varnish, please note this will make the steel appear ‘wet’ or darker for the rest of the item’s life.

If Corten Steel is scratched or the weathered surface is damaged, it will re-weather (heal) itself back to the original weathered state, making the damaged area nearly undisguisable from the rest of the planter.